Pressure Blowers for Internal Bubble Cooling

For an internal bubble cooling (IBC) control system to function, there has to be forced movement of cold air into the bubble and hot air out of the bubble. This is done with high pressure blowers like the one shown. 

For maximum possible air exchange rate, the blower must be properly sized based on the physical dimensions of the air flow passageways, the die diameter, and the maximum required volume. If the IBC blowers are not sized properly, loss in potential production rate will be the result due to poor airflow, and potentially higher energy consumption from an improperly sized blower.

D.R. Joseph Offers NY Blower Pressure Blowers for blown film applications.  Part of the value of working with DRJ for your blown film blower applications is our in house Air Flow Load Anaylsis that we perform to precisely calculate the required airflow, pressure and HP rating required for your application’s best performance.

NY Blower utilizes robust components, and are built to last and perform in the demanding environment of a blown film plant.

NY Blower offers one of the largest ranges of sizes and options for every application.  A common option in blown film applications is a Stoddard Filter.  The filter works to keep IBC air clean, reducing the amount of dirt that can accumulate and clog the air passages for the cooling IBC air.  This reduces ducting maintenance and can lead to better long-term stability.

D.R. Joseph works with customers to estabilsh the proper size, air flow, pressure and blower rotation configuration.  If you have a particularly small installation space, various outlet orientations are available to utilize the existing space for your installation.

With spare parts and stock in the USA, customers can be assured that leadtimes are minimal, and support is available when you need it.